400-748-9988

BW612

  • BW612
  • System characteristics:

    Complete coupling techniques for predictable coverage          
    Superior analytical power.          
    Save space, strong power          
    Complete, professional suspension system          
    Suitable for medium range applications          
    Wear resistant, two component exterior finish, providing ultra high scratch protection

  • Description
  • Application
  • Technical performance

    BW-612 targeted HI room and well-designed, after dozens of acoustic design testing and dedicated HI room test, and finally introduced in the third generation HI room speaker in the 2012. Using the wrong title diffusion constant directivity horn design, the box body is provided with a 12 inch (75MM) reflection type low frequency drive and a 2 inches (44MM) high frequency compression type drive, these advanced components and internal passive crossover network phase (two optional frequency effect) to ensure, in the transition between high frequency and low frequency unit unit no joint. BW-612 is equipped with an intelligent protection circuit, when added to the compression on the drive signal for potential damage when the circuit can automatically and visibly signal attenuation, and high frequency driver free of accidental damage. Two treble effect can be selected in the wiring board, more designed for different HI room, to achieve the best coupling quality. BW-612 with the 35mm speaker base or with optional vertical bar to be fixed on the BW series of bass speakers, so that small clubs in the hotel room gives a good vertical coverage. Can choose M10 fixed ring screw bolt mounting shoulder back, with the addition of a hanging point is also located in the BW-612 box, the vertical inclination of it can provide FCL body, so as to cover the required field.              

    Concert          

    Café          

    Do HI room and K room          

    Fixed installation


    The frequency response 55 Hz - 20 kHz          

    The driver 1X12 inch reflective 1X2 inch woofer reflective high frequency unit          

    The speaker power 400 Watt (1200 Watt Peak Power)          

    The sensitivity of 1m\1w 98dB          

    The maximum sound pressure level 129dB          

    Rated impedance of 8 ohm          

    The frequency optional two treble way          

    High angle cover 50 degrees to 100 degrees by 55 degree vertical can be horn rotation, fixed position 4          

    The material 18MM high quality 11 layer plywood          

    The appearance of color wear black, two-component appearance finishing, high scratch protection          

    Net 1.2mm six angle, back acoustically transparent sponge          

    The input interface 2 Neutrik 4 core seat          

    The size (width X X) 396 mm x 390 mm x 628 mm

Copyrights by SEAPRO .All Rights Reserved.